Serial number 152140R is for the 4020 John Deere model. Famously known as one of the most famous tractors in the agricultural sector, it was invented in 1967. The 4020 was considered dependable, strong, and technologically advanced while it was in production, and even today, 1967 Manufacturer john deere model 4020 serial number 152140r, farmers, collectors, and vintage tractor enthusiasts continue to admire it. As part of the utility tractors manufactured by John Deer, the model 4020 was manufactured at a time when there was an advanced technological change in farming, and it was able to meet the new demands. This article will focus on assisting you in comprehending the specifications, features, and contextual relevance of the 1967 model of John Deer’s tractor, alongside a plethora of other aspects.
What Other Important Features and Specifications Were There for The 1967 Manufacturer John Deere Model 4020 Serial Number 152140r?
The 4020 model on John Deere’s innovative line of tractors was powered by a utility-based engine that was able to create exceptional utility. This tractor was famed for its versatility, high performance, and consistent operational power, which is still regarded to this day. Let us take a close look at its technological characteristics to understand its uniqueness.
Options regarding the engine
For the case of agricultural equipment, which is referred to as the 1967 Manufacturer john deere model 4020 serial number 152140r, there are 2 types of engine available for purchase. These are a diesel and gasoline engine. Whether it’s an engine or a farm task, it will definitely get the job done; these engines have enough torque and require horsepower to perform a wide variety of tasks, whether it is plowing the fields or hauling heavy equipment.
| Engine Type | Engine Displacement | Horsepower | Maximum RPM |
|---|---|---|---|
| Diesel | 404 cubic inches | 84 hp | 2,000 rpm |
| Gasoline | 312 cubic inches | 80 hp | 2,000 rpm |
- Diesel engine: The diesel variant engine was more widely used as compared to the rest due to its high reliability, power and fuel efficiency. There was enough horsepower provided at 2,000 RPM Speeds, allowing this to easily perform heavy farm work.
- Gasoline engine: The gasoline engine was also considered an option, but due to lower horsepower, it was suitable only for smaller tasks.
Change in transmission
Under different agricultural settings, conditions or requirements, the John Deere Model 4020 has great robustness, which allows its transmission to be suitable for varying performances.
| Transmission Type | Speed Gears | Forward Speed | Reverse Speed |
|---|---|---|---|
| Synchro-Range | 8 gears | 1.7 to 15.5 mph | 2.5 mph |
| Power Shift | 8 gears | 1.5 to 14.5 mph | 2.4 mph |
While the Synchro-Range transmission was more user-friendly, offering better control over power change, the Power Shift version had an improved mechanism shift. Still, it did not require one to overly detach from the current momentum.
Hydraulic System
The John Deere 4020 hydraulic system was fundamentally very powerful, allowing for enhanced precision alright. It operated over closed-center hydraulics with a resource flow rate of 17.9 gallons per minute (GPM). This system could raise heavy loads and use attachment equipment, 1967 Manufacturer john deere model 4020 serial number 152140r, giving farmers the power to do more with the machine.
Dimensions
The John Deere Model 4020 is a mid-ranged tractor that has the following dimensions:
| Specification | Measurement |
|---|---|
| Length | 137 inches |
| Width | 84 inches |
| Height | 100 inches |
| Wheelbase | 92 inches |
| Weight | 7,500 lbs |
The 92-inch wheelbase allowed it to be more stable and operate smoothly under dynamic work conditions. Weighing 7500 pounds combined with the other dimensional sizes made it relatively lighter so that it didn’t hinder movement too much while providing enough weight for traction.
Historical Importance of the John Deere Model 4020
The 1967 Manufacturer john deere model 4020 serial number 152140r, is one of the most important developments in farm equipment history. It was developed at a time when there was a thick demand for increasingly efficient, powerful, and multipurpose farming implements, and the 4020 redefined agricultural machinery. Let’s delve deeper into some of the notable historical milestones:
- Inauguration of New Features: The 4020 model did bring into the standard range several key features that were considered break even at the time, 1967 Manufacturer john deere model 4020 serial number 152140r, such as Synchro-Range transmission, better hydraulics and further improvement of engine configurations.
- Market Performance: From the time it was first released, John Deere 4020 became one of the best-selling tractors of that class. Farmers managed to appreciate the tractor for its reliability and functionality for diverse farm tasks.
- Contribution to Farmers Mechanization: The 4020 was of great significance as a tractor during the 1960s when tractors were being used for farming mechanization. The 4020 was engineered in such a way as to improve the efficiency of the engines and thereby allow farmers to do more work in less time, 1967 Manufacturer john deere model 4020 serial number 152140r, thereby improving productivity.
John Deere Model 4020 of 1967: Maintenance, Care and Repair
Owning a 1967 John Deere Model 4020 gives you a feeling that is hard to come by. However, to enjoy your classic tractor for a long time, it is essential to take care of it, as proper maintenance ensures its performance. Following are some intermediate maintenance steps for the Model 4020:
Engine and Lubrication
Ensuring that the lubricating oil stays clean is paramount for the smooth operation of the tractor. Maintain the engine by frequently carrying the following modifications:
- Oil Change: Change the SAE 30 or 10W30 engine oil every 100 hours, tailored for the climate zone. As a thumb rule, always go for oils that adhere to the standards set forth by John Deere.
- Fuel System: To allow for maximum fuel economy, filters must be changed periodically as suggested by the manufacturer. Be sure to utilize high-quality filters to avoid particulate build-up.
- Engine: For optimal performance of the engine, it is best to change the air filters. However, 1967 Manufacturer john deere model 4020 serial number 152140r, conditions may allow for filters to be used for up to 50 hours.
Transmission and Hydraulics
As for the transmission system and the hydraulic system for Model 4020 to work seamlessly, it is paramount that the following is performed.
- Transmission Fluid: Follow the basic rule of changing the transmission fluid after 1000 working hours to keep the rpm high and working time at optimum levels.
- Hydraulic System: The hydraulic system used on the Model 4020 is used to lift and transport heavy implements. When servicing, 1967 Manufacturer john deere model 4020 serial number 152140r, always use the right hydraulic fluid for the machinery and ensure it is clean. Regularly check and top up where necessary and replace every 1000 hours or according to the manufacturer’s recommendations.
Tires and Suspension
Wheels provide traction and stability on the John Deere 4020. Therefore, they should always be inflated correctly; otherwise, wear could occur to the tires. This could also affect the overall performance of the machinery.
- Tire Pressure: It is good practice to check tire pressure on a regular basis; this is especially important before the machinery is used for work. The specifications and recommendations for tire pressure depend on the load and use of the equipment; therefore, check in the owner’s manual.
- Tire Inspection: Check for physical damage on the tires, such as tears, cuts or punctures. If the tire has sustained any damage, 1967 Manufacturer john deere model 4020 serial number 152140r, replace or repair it as soon as possible to avoid any safety or performance issues.
Cooling System
To help keep the engine from overheating while operating the tractor for prolonged periods, the tractor is equipped with a cooling system. You can service the cooling system through the following means.
- Radiator: To help prevent dirt, debris and dust from obstructing the free flow of air through the radiator, clean the radiator at set time intervals.
- Coolant Levels: Check the coolant level on a regular basis, also make sure that the appropriate coolant mixture is used for the area so the engine does not get damaged.
Electrical System
Despite not being complicated, the 4020’s electrical system requires attention to detail.
- Battery: Always check the battery terminals for corrosion and clean where required. Also, ensure it’s performing optimally.
- Wiring: Look at all cables and wires for wear, and if any fraying is noticed, then replace them to reduce the chances of electrical malfunctions.
Lubrication
To improve performance fundamentally and reduce wear and tear on some key parts, lubrication for joints and bearings is crucial.
- Grease Points: Consult the owner’s manual for grease-specific points in order to accurately grease different parts of the tractor to make it function properly.
- Chassis and Linkage: To reduce friction on the chassis and moving parts, an appropriate lubricant should be sprayed in order to avoid unnecessary wear.
The 1967 John Deere Model 4020 in Culture and Collecting
Not only is the John Deere Model 4020 a tractor in wide usage, but it is also a thing of beauty and a huge piece of agricultural history. That is one of the reasons it has found its place in numerous collections, 1967 Manufacturer john deere model 4020 serial number 152140r, exhibitions, and tractor shows over the years. This piece of machinery is a favorite in vintage farm and tractor displays due to its power and design and the history it comes with.
Collectibility
It is noteworthy to mention that vintage tractor collectors adore the Model 4020 due to its aesthetic appeal and incredible engine performance, and it is still in use by farms across the globe; its collectibility can be attributed to a number of factors, especially:
- Rarity: Specific 4020 John Deere tractors from 1967, especially with the unique serial number (152140R), are scarce in contrast to the number of units manufactured, making it a desired piece for collectors.
- Condition: Models that are restored or well-maintained are normally auctioned at an elevated price, 1967 Manufacturer john deere model 4020 serial number 152140r, which serves as a great investment opportunity for tractor enthusiasts.
- Historical Significance: The Model 4020 is one of the key tractors that led modern farming to hold historical importance.
Tractor Shows and Auctions
Owners flock from across all parts of the world to attend events dedicated to tractors, like The National Farm Machinery Show and Antique Tractor Shows, to pay homage to the history of these machines. Such events often have a key highlight of restored 1967 Manufacturer john deere model 4020 serial number 152140r many owners want to showcase them to the world.
The condition, originality, and rarity of a 1967 Manufacturer john deere model 4020 serial number 152140r its price; however, it’s safe to say that the average auction price can extend to thousands of dollars. If you’re a collector, then a well-functioning 4020 that still has its original components is quite valuable.
All The Variants And Modifications Of John Deere Model 4020
To better serve the farmers, multiple modifications were made to the John Deere 4020 throughout its production. Some noteworthy model variants and their modifications are mentioned below:
Diesel Models and Gasoline
As previously mentioned, the 4020 came with both gasoline and diesel-powered engines. Among the two, the diesel engines tended to be the more popular choice; however, for work that required lighter consumption, 1967 Manufacturer john deere model 4020 serial number 152140r, the gasoline versions were more ideal. Additionally, the gasoline engines were easier to start in the cold as well.
Hydrostatic Transmission Model
A Hydrostatic Transmission model was made available for the later models of the 4020. With this, the tractors would function much smoother and would be easier to use for more operative work such as hay rakes or loaders.
Particulars Regarding Cab and Comfort Additions
As more operators wanted more comfort, enhancement in cabs was implemented within several 4020s along with upgrades in cabs. Also, boosting workloads through after-market adjustments featuring a cab or a more supportive and comfortable seat would be a requirement for farmers. With these enhancements, it is possible to make working in rough weather conditions easier for the operators.
Also Read More: Sunken Bath Ideas
Why Does the 1967 John Deere Model 4020 Continue to Be Bulldogs?
A modern-day 1967 John Deere Model 4020 stands alone as an important and respected artifact within farming machinery history. It is noted for changing the farming landscape in power, durability, and even design in the late 60s and early 70s. Even if production was discontinued, 1967 Manufacturer john deere model 4020 serial number 152140r, the memories of people using and operating the tractors ensure that this brand’s legacy lives on.
More than just a tractor, the John Deere Model 4020 signifies the very essence of American ideas, which include innovation, agriculture, hard work, and progress. Even in the collection and the modern farm shed, 4020 serves as a reminder of John Deere’s ethics envisaged up to date for efficient agricultural mechanization.
FAQs About the 1967 John Deere Model 4020 Serial Number 152140R
What is the significance of the 152140R serial number of the John Deere Model 4020?
The serial number 152140R is used to describe one of the tractors from the range of the 1967 John Deere Model 4020. Every serial number is associated with a particular tractor designed and manufactured by John Deere, providing critical data on the machine’s production date, engine features, and the order of its production.
What is the horsepower rating for the 1967 model of the John Deere Model 4020?
For this particular model, it features a diesel engine of 4.04L capable of generating 84 horsepower when running at 2000 revolutions per minute. If using the gasoline variant, it is rated at 80 horsepower.
What specific options for transmission are available with the John Deere Model 4020?
Available are two common implements: Synchro-Range and Power Shift. The 1967 John Deere Model 4020 comes standard with both types of steering, also featuring 8 forward gears and an angle interval of 1.7 to 15.5 miles per hour of motion.
Describe the hydraulic system that is designed for the 1967 Manufacturer john deere model 4020 serial number 152140r?
The 1967 Manufacturer john deere model 4020 serial number 152140r contains a hydraulic system that is located at the closed center, giving this system an output of around 17.9 GPM. This type of hydraulic system is compatible with heavy implements like loaders and plows.
The Lasting Impact and Collectibility of The 1967 John Deere Model 4020 Would you like to know if collectors still have high regard for the 4020?
The answer is yes, coupled with the fact that this tractor is considered to be still in steadily high-usage. This is due to its rather superior design. Farmers and collectors alike consider this model to be one of the most dependable models by far built by John Deere.
Conclusion
John Deere as a brand has offered tremendous value to the farming industry through their engineering solutions, and the 1967 Manufacturer john deere model 4020 serial number 152140r is a perfect example of it; with remarkable features and historical relevance behind it, it’s quite clear as to why the tractor holds such prominence among the other tractors. Be you a farmer, a task collector, or simply someone who enjoys tractors, the Model 4020 shines a light on the past of modern farming equipment.
Also Read More: How to Secure a Bookcase to a Wall
